Byron Mcmahon
Parker,AZ
Summary
Experience developing and maintaining both Heavy industrial and Motorsport Controls systems. Spearheaded multiple system diagnostic lines while serving as project lead to bring multi-thousand dollar new constructions to reality. Experience in technical and non-technical roles to demonstrate a strong and adaptable work ethic to lead and be a team player for various types of people and situations. Constantly researching and evaluating new to market components and technologies offering better value and performance. Obsessed with testing new theory's to constantly find better processes to increase efficacy's saving time and money. I pride myself on being open to new ideas and providing quality work under pressure.
Overview
14
14
years of professional experience
Work History
Multiskilled Technician, Controls
TC Energy
02.2021 - Current
- Commission and maintain 480v switchgear. VFD,s, Soft starters, Relays, etc. Verifying correct use case application and suggesting alternates where necessary.
- Test and maintain Ac 110-480v motors from 1/2-50hp
- Test and maintain UPS battery systems. 24-130VDC FLA, Gel and Flooded NiCad.
- Commission and maintain UPS Inverters with down to board level diagnostics.
- Work with AB and Control Wave PLCs to diagnose various faults and unexpected outcomes.
- Troubleshoot and maintain Solar Jet engine control package both on the PLC and end device side.
- Maintain and perform calibrations on Natural Gas measurement equipment. Gas Chromatograph, Ultrasonic meters, Pressure & Temp transmitters, Coriolis meters, Etc.
- Responsible for the pipelines Cathodic protection system while also performing annual surveys.
Motorsport Fabrication and Wiring Lead
Cutting Edge Fabrication
02.2014 - 02.2021
- Repaired existing broken electrical components with 80% success rate – saving clients up to 70% vs new part replacement
- Designed wiring harnesses from ground up pertaining to engine management and chassis CAN networks
- Used PC based software to tune as well as diagnose engine drivability and performance
- Diagnose, troubleshoot, and fix electrical issues in electrical systems as arose; problems generally found within 2 hours of inspection – saving clients excess diagnostic costs of $200+
- Made parts not otherwise available from CAD files or drawings using shop equipment including, Mills, Lathes, welders, Etc
- Re Designed client supplied parts to reduce both manufacturing time and therefore cost by up to 28% while adding additional features
Lead Electrical Mechanical Technician
Bad Attitude Boats
02.2012 - 02.2016
- Provided specialized diagnosis and repair of advanced engine management systems; around 90% of the time a pin pointed diagnosis was reached within 1 hour
- Assisted and supervised a 3 technician team with diagnosis of advanced issues using skills and knowledge gained from past experience. Saved clients thousands on a possible misdiagnosis
- Experience with programming new electronic hardware such as $3500+ Power Distribution Modules, $5500 Engine Control Modules, and other CAN based instrumentation and control modules
- Convert older mechanical data display systems to more modern CAN based pressure & temperature transducer based systems, improving the overall accuracy of the gauging systems 200%
- Met with clients seeking new electrical control and data acquisition packages; consulted with peers to agree upon and present possible, cost effective and timely solutions to the customer
Pump House and Storage Tank Controls Technician
Mitchell's Oilfield Service
07.2013 - 08.2014
- Tested pressure and temperature transmitters, Flow meters, electronic control valves, tank level sensors etc to insure proper output to the main PLC
- Created and tested new complete wiring harnesses according to wiring diagrams and schematics provided by the lead electrical engineer and held a 100% success rate
- Worked with engineers to incorporate existing systems into new construction for maintaining functionality while keeping costs in check.
- Safety certified from ConocoPhillips, Hess oil, Halliburton , and Exxon mobil - 100% Accident free
Mill Systems Maintenance Technician
Mineral Park Mine
07.2010 - 06.2011
- Diagnosing, repairing or replacing major electrical components as needed or required including electric single and three phase motors ranging from ⅓ to 30hp bring systems back online quickly
- Installed Variable Frequency Motor Drives where applicable , reducing start up energy consumption by up to 50%
- Manufactured new conveyor belt shafts, frame structures as well as modifying existing gearboxes, shafts etc in house using shop equipment
- Constantly engaging in all available trainings and seminars quickly growing my understanding of current GE and Siemens software and Programmable Logic Controllers
- Gathered data on integration issues and vulnerabilities while reporting all findings to lead electrical engineer with improvement recommendations helping maintain and design failure free systems reducing down time
- Maintained MSHA Safety certificate and OSHA 40 card – ZERO REPORTED ACCIDENTS
Education
High School Diploma -
Lake Havasu High School
Lake Havasu City, AZ06.2010
Skills
- Proficient in using specialty test equipment, oscilloscopes, voltmeters, meggers, diagnose problems or calibrate new components
- Competent at both mechanical and electrical diagram interpretation
- Experienced in new wire harness construction using industry standard solder and heat shrink creating watertight connections
- Well versed with components such as: Motors, Mag starters, PID -Controllers, VFD drives, Relays, Gears, Chains, Pulleys, Gearboxes, Etc
- Journey level welder, Specializing in Mig and tig welding various types of materials including carbon steel, stainless, titanium and aluminum
- Heavy equipment operators license for general shop equipment, Forklift, Manlift, Backhoe, Overhead Crane, Skid Steer Loader, Etc
- Hydraulic and Pneumatic system experience including rebuilding rams, Control Valves, Making Lines, Fluid Service and Testing, Pressure Testing
- Capable of making or repairing parts using shop equipment such as, Mills and Lathes (both manual and cnc), Bandsaws, Plasma Cutter (both cnc and hand held), Welders, Grinders, Mag Drills, Presses, Hand Tools
- Competent at using CAD software (both 2D and 3D) to design new problem solving parts or view and make changes to current designs
- Experience using PC based engine diagnostic software to view live data as well as trouble codes leading to faster more accurate diagnosis
- Automotive and Heavy Equipment based HVAC service experience
Timeline
Multiskilled Technician, Controls
TC Energy
02.2021 - Current
Motorsport Fabrication and Wiring Lead
Cutting Edge Fabrication
02.2014 - 02.2021
Pump House and Storage Tank Controls Technician
Mitchell's Oilfield Service
07.2013 - 08.2014
Lead Electrical Mechanical Technician
Bad Attitude Boats
02.2012 - 02.2016
Mill Systems Maintenance Technician
Mineral Park Mine
07.2010 - 06.2011
High School Diploma -
Lake Havasu High School
Similar Profiles
DON MITCHELLDON MITCHELL
Welding Inspector at TC EnergyWelding Inspector at TC Energy
BENITA IJIEBENITA IJIE
Project Scheduler at TC EnergyProject Scheduler at TC Energy
Ryan BuchananRyan Buchanan
Project Controller at TC EnergyProject Controller at TC Energy