Dane Kirmel
Mesa
Summary
Experienced and determined individual with knowledge and understanding with prints/drawing interpretation and system installation, ensuring precise assembly of piping systems. Utilizes problem-solving skills to address and resolve technical issues.
Overview
15
15
years of professional experience
Work History
Journeyman Pipefitter
University Mechanical LU 469
06.2024 - 02.2025
- Fabricated, assembled, installed and tested piping systems.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Followed safe work practices, which included fall protection and personal protective equipment (PPE).
- Read and interpreted prints, isometric drawings and other technical drawings to determine best installation methods.
- Demonstrated versatility in working with various piping materials including Polyvinylidene Fluoride PVDF for Ultra Pure Water (UPW) systems. Polypropylene Pipe for Acid Waste (AW) systems and PVC for Sulfuric Acid and other chemical systems for diverse project requirements at Intel in Chandler, AZ.
Journeyman Pipefitter
Viking Industrial LU 469
09.2023 - 05.2024
- Fabricated, assembled, installed and tested piping systems.
- Followed safe work practices, which included fall protection and personal protective equipment (PPE).
- Installed and assembled industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Measured, cut, assembled and installed hanger/support systems for multiple piping systems tightened and torqued to specifications.
- Demonstrated versatility in working with various piping materials including Polyvinylidene Fluoride PVDF for Ultra Pure Water (UPW) systems. Polypropylene Pipe for Acid Waste (AW) systems and PVC for Sulfuric Acid and other chemical systems for diverse project requirements at Intel in Chandler, AZ.
Journeyman Pipefitter
Yearout Mechanical LU 412
03.2023 - 08.2023
- Enhanced facility efficiency with timely installation, brazing and testing of medical gas piping systems.
- Collaborated with other union members to complete large-scale copper pipe brazing assignments efficiently and accurately.
- Testing medical gas systems at high PSI with nitrogen NF for inspection and smooth operation of piping systems in patient rooms and operating rooms.
- Fabricated, assembled, installed medical gas copper piping systems at University of New Mexico Hospital.
Journeyman Pipefitter
Dynamic Systems, Inc. LU 286
01.2022 - 03.2023
- Enhanced facility efficiency with timely installation, brazing and testing of medical gas piping systems.
- Collaborated with other union members to complete large-scale brazing assignments efficiently and accurately.
- Testing Medical gas systems at high PSI with nitrogen NF for inspection and smooth operation of piping systems in patient rooms and operating rooms.
- Fabricated, assembled, installed medical gas copper piping systems at Texas Children's Hospital.
- Air Handler and Mechanical carbon steel piping install on rooftop. unit tie ins and copper piping install for multiple units above ceiling at Texas Department of State Health Services Public Health Laboratory.
Journeyman Pipefitter
TCS Mechanical LU 286
11.2020 - 01.2022
- Completed Piping projects on time through efficient time management and prioritization of tasks.
- Foreman position with a crew over mechanical carbon steel pipe and plumbing piping systems PVC, cast iron and copper for a remodel/renovation at Walter Webb Hall in Austin, TX.
- Measured, layout and pipe detailed for roof top OA coil units and other technical drawings to determine best installation methods at Samsung in Austin, TX.
- Fabricated, assembled, installed stainless steel, carbon steel and copper piping systems at Samsung in Austin, TX.
Journeyman Pipefitter
Five F Mechanical LU 286
06.2019 - 11.2020
- Medical gas copper piping installation at Baylor Scott & White Medical Center in Austin, TX.
- Foreman with a crew over sanitary waste and domestic water systems at City of Austin Development Services Department in Austin, TX.
- Foreman with a crew at Austin Energy in Austin, TX over tie in connections from carbon steel to unit hookup for fan coil units (FCU), variable air volume (VAV) and chilled beam units.
Building Trades Apprentice
Brandt Companies LLC LU 286
08.2016 - 06.2019
- Apart of high rise development from ground up to top out at Austin Proper in Austin, TX.
- Enhanced practical skills and installation of plumbing fixtures at Austin Proper in Austin, TX.
- Installation and testing on multiple piping systems from victaulic stainless steel, uponor pex piping, PVC, cast iron, copper and domestic water systems
Building Trades Apprentice
S.I. Mechanical LU 286
03.2016 - 08.2016
- Installation of underground plumbing systems from cast iron to PVC.
- Pro press copper installation including soldering and brazing
- Worked at McCallum High School for remodel/renovation in Austin, TX
Building Trades Apprentice
Dynamic Systems, Inc. LU 286
10.2015 - 03.2016
- Learned wide range of simple and complex techniques from on-the-job training.
- Soldering and pro press install for copper piping systems including cast iron pipe install.
- Worked at St. Davids Medical Center in Austin, TX for a remodel/renovation plumbing systems and fixtures.
Building Trades Apprentice
Young & Pratt LU 286
05.2014 - 10.2015
- Demonstrated eagerness to learn by asking questions and seeking clarification when necessary.
- Worked at multiple jobsites pipefitting carbon steel for chilled water and heating water systems bolt up and screw pipe for natural gas.
- Copper piping install for domestic water systems soldering and brazing as well as condensate lines.
- Worked under guidance of Foreman and Journeyman to learn trade best practices and techniques.
Allied Trades Specialist E-4
US Army Fort Hood
05.2010 - 05.2014
- Served in the United States Army 4 years active and from 2014-2022 served in Army Reserves at the Armed Forces Reserve Center in Austin, TX.
- Enhanced unit readiness by conducting thorough training sessions and evaluations.
- Contributed to successful military exercises through effective coordination and task delegation among other soldiers.
- Deployment to Afghanistan in 2011 for Operation Enduring Freedom and in 2013 with distribution platoon for convoy logistic missions.
Education
Journeyman Pipefitter - Pipefitting/Plumbing
Local 286 5 Year Apprenticeship
Austin, TX06-2019
High School Diploma -
Ernest Righetti High School
Santa Maria, CA06-2007
Skills
- Detail-Oriented
- Critical Thinker
- Effective Communication
- Management Skills
Timeline
Journeyman Pipefitter
University Mechanical LU 469
06.2024 - 02.2025
Journeyman Pipefitter
Viking Industrial LU 469
09.2023 - 05.2024
Journeyman Pipefitter
Yearout Mechanical LU 412
03.2023 - 08.2023
Journeyman Pipefitter
Dynamic Systems, Inc. LU 286
01.2022 - 03.2023
Journeyman Pipefitter
TCS Mechanical LU 286
11.2020 - 01.2022
Journeyman Pipefitter
Five F Mechanical LU 286
06.2019 - 11.2020
Building Trades Apprentice
Brandt Companies LLC LU 286
08.2016 - 06.2019
Building Trades Apprentice
S.I. Mechanical LU 286
03.2016 - 08.2016
Building Trades Apprentice
Dynamic Systems, Inc. LU 286
10.2015 - 03.2016
Building Trades Apprentice
Young & Pratt LU 286
05.2014 - 10.2015
Allied Trades Specialist E-4
US Army Fort Hood
05.2010 - 05.2014
Journeyman Pipefitter - Pipefitting/Plumbing
Local 286 5 Year Apprenticeship
High School Diploma -
Ernest Righetti High School
Similar Profiles
PAUL TILLSONPAUL TILLSON
Plumber Gas Fitter at UA Local 469Plumber Gas Fitter at UA Local 469
John RoccoJohn Rocco
Journeyman Lineman at MasTec 469-794-6743 Billy Cotton- ForemanJourneyman Lineman at MasTec 469-794-6743 Billy Cotton- Foreman
Bradley JahnBradley Jahn
Parts Specialist at 469 Cycle ShopParts Specialist at 469 Cycle Shop