Summary
Overview
Work History
Education
Skills
Affiliations
Accomplishments
Certification
Languages
References
Timeline
Generic

DELIA MAURICIO

Avondale

Summary

Hardworking and highly skilled Delia Mauricio offering proven expertise in completing high purity, low purity, drain installation with high-quality work. Efficiently cut and fabricate pieces to finalize designs. Excellent technical, project management and decision-making abilities developed over 25 years of piping experience.

Overview

25
25
years of professional experience
1
1
Certification

Work History

STEAMFITTER

TWEET GAROT
TEMPE
02.2025 - 04.2025
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Read blueprints and diagrams to determine pipe layouts.
  • Assembled and secured pipes for the welder.
  • Install supports for pipes to keep them in place during installation process.
  • Measured, cut, prepped, and installed piping according to specifications.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Observed safe work rules and utilized fall protection and PPE.
  • Drilled and tapped holes for installation of studs.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Performed rigging and forklift operations to maneuver parts and machinery.
  • Worked on/off ladders and MEWPs.
  • Erected rigging systems to safely install pipes.

Field Superintendent

JACK B HENDERSON (JBH)
PHOENIX
08.2024 - 02.2025
  • Oversaw the selection of appropriate materials needed for each stage of the job.
  • Ensured that all work was performed according to blueprints, plans and specifications.
  • Maintained accurate records of daily work activities including labor hours used per task or job completed.
  • Kept up-to-date with local building codes and regulations pertaining to commercial projects.
  • Assisted in troubleshooting problems during the construction process by providing solutions based on best practices.
  • Managed multiple projects simultaneously while meeting deadlines and maintaining quality standards.
  • Supervised the installation of high and low purity stainless steel systems, pro press, low purity chemical systems, drains, and water lines.
  • Provided technical support to subcontractors and engineers to ensure project completion on time and within budget.
  • Managed day-to-day operations, including scheduling and supervising field personnel, resolving operational issues and ensuring safety compliance.
  • Participated in weekly meetings with the client's representatives to discuss project status updates.
  • Monitored project progress against established milestones to identify potential delays or risks in a timely manner.
  • Developed and maintained relationships with key stakeholders such as clients, contractors, vendors, suppliers and other team members.
  • Resolved conflicts between workers onsite through effective communication strategies.
  • Coordinated materials delivery schedules with suppliers to maintain an efficient flow of resources on the job site.
  • Inspected completed jobsites upon completion to ensure customer satisfaction levels were met before final acceptance by client.
  • Drafted reports for senior management outlining progress made on each project phase.
  • Performed pre-construction planning activities such as material ordering, equipment rental coordination and manpower scheduling.
  • Oversaw workflow on job sites and kept projects on schedule.
  • Developed and deepened relationships with many different parties.
  • Read project documents, interpreted directions and made plans based on design parameters.
  • Inspected buildings to determine quality of work and need for corrections to meet project standards.
  • Maintained electronic inventory of project paperwork, schedules and permits.
  • Verified work compliance with applicable regulations, codes and specifications.
  • Kept production team moving forward for progress in daily site operations.
  • Trained and monitored employees to teach daily tasks and improve performance.
  • Prepared and planned worksites to help jobs run smoothly.
  • Implemented onsite safety protocols and procedures and properly trained team members on prevention measures.
  • Reported project progress, site problems and labor status to supervisors.
  • Created work crew schedules and delegated assignments.
  • Reviewed project blueprints and specifications to determine number of workers needed to complete jobs.

General Foreman

JBH
Phoenix
09.2023 - 08.2024
  • Resolved conflicts between workers regarding job assignments, methods, or deadlines.
  • Maintained accurate records of daily operations including time cards, production data logs.
  • Identified potential risks associated with each project before beginning work.
  • Performed inspections of completed work prior to acceptance by client or owner representative.
  • Oversaw all aspects of construction including scheduling personnel and supplies as needed.
  • Monitored project progress to ensure efficient use of resources and timely completion of tasks.
  • Supervised, trained, and evaluated assigned personnel in accordance with company policies and procedures.
  • Communicated regularly with team members about changes in scope or schedule.
  • Developed and implemented job plans for construction projects.
  • Coordinated materials procurement with suppliers, contractors, and subcontractors.
  • Ensured safety protocols were followed and maintained by all personnel on site.
  • Responded promptly to inquiries from clients or owners representatives related to project status or progress.
  • Analyzed blueprints and other documents to plan layout of projects.
  • Prepared reports detailing progress against established benchmarks or milestones.
  • Analyzed job sites to mitigate risks.
  • Followed rules and regulations to keep job sites safe for workers, contractors and visitors.
  • Delegated work to team members and checked for completion in compliance with company guidelines and customer needs.
  • Documented labor hours, crew attendance and individual performance.
  • Directed fabrication of components needed for specific jobs.
  • Reviewed blueprints and specifications prior to starting job to fully understand project scope.
  • Studied project specifications to plan sequence and schedule for pipe installations.
  • Recorded job supplies, parts, equipment and employee hours.
  • Performed final walkthroughs of each job and prepared reports.
  • Communicated with employees to demonstrate high standards and mitigate issues.
  • Supervised projects to uphold schedule requirements and quality demands.
  • Managed sites by focusing on safety, operations and productivity.
  • Planned and managed manpower and resource requirements to support project activities.
  • Tracked and reported units and labor hours prior to submission of timecards.
  • Created work crew schedules and delegated assignments.
  • Prepared and planned worksites to help jobs run smoothly.
  • Reported project progress, site problems and labor status to supervisors.
  • Kept production team moving forward for progress in daily site operations.

General Foreman

Kinetics Systems
PHOENIX
11.2022 - 09.2023
  • Resolved conflicts between workers regarding job assignments, methods, or deadlines.
  • Maintained accurate records of daily operations including time cards, production data logs.
  • Directed the activities of subcontractors to ensure quality workmanship and adherence to contract specifications.
  • Identified potential risks associated with each project before beginning work.
  • Performed inspections of completed work prior to acceptance by client or owner representative.
  • Oversaw all aspects of construction including scheduling personnel and supplies as needed.
  • Monitored project progress to ensure efficient use of resources and timely completion of tasks.
  • Supervised, trained, and evaluated assigned personnel in accordance with company policies and procedures.
  • Communicated regularly with team members about changes in scope or schedule.
  • Developed and implemented job plans for construction projects.
  • Collaborated with engineers and architects on design modifications when necessary.
  • Coordinated materials procurement with suppliers, contractors, and subcontractors.
  • Ensured safety protocols were followed and maintained by all personnel on site.
  • Responded promptly to inquiries from clients or owners representatives related to project status or progress.
  • Analyzed blueprints and other documents to plan layout of projects.
  • Prepared reports detailing progress against established benchmarks or milestones.
  • Interpreted engineering drawings and specifications during construction process.
  • Followed rules and regulations to keep job sites safe for workers, contractors and visitors.
  • Delegated work to team members and checked for completion in compliance with company guidelines and customer needs.
  • Documented labor hours, crew attendance and individual performance.
  • Directed fabrication of components needed for specific jobs.
  • Reviewed blueprints and specifications prior to starting job to fully understand project scope.
  • Studied project specifications to plan sequence and schedule for pipe installations.
  • Recorded job supplies, parts, equipment and employee hours.
  • Performed final walkthroughs of each job and prepared reports.
  • Communicated with employees to demonstrate high standards and mitigate issues.
  • Complied with federal and company regulations to maintain high level of job site safety.
  • Checked project details to verify job site materials and equipment.
  • Supervised projects to uphold schedule requirements and quality demands.
  • Planned and managed manpower and resource requirements to support project activities.
  • Managed workers at various experience levels in construction and restoration projects.
  • Created work crew schedules and delegated assignments.
  • Prepared and planned worksites to help jobs run smoothly.
  • Reported project progress, site problems and labor status to supervisors.
  • Kept production team moving forward for progress in daily site operations.
  • Reviewed project blueprints and specifications to determine number of workers needed to complete jobs.
  • Implemented onsite safety protocols and procedures and properly trained team members on prevention measures.
  • Established and enforced procedures and work standards, promoting team performance and safety.

Foreman

Kinetics Systems
PHOENIX
07.2022 - 09.2023
  • Resolved conflicts between workers in a timely manner.
  • Trained new employees in safety regulations, operational procedures, and company policies.
  • Assessed work area conditions for potential hazards or risks.
  • Supervised activities of personnel assigned to various tasks during construction jobs.
  • Provided guidance, direction, and technical assistance to crew members.
  • Ensured all workers adhered to company policies and procedures.
  • Identified areas of improvement for increased efficiency and productivity.
  • Managed inventory levels of supplies necessary for job completion.
  • Maintained daily logs of labor and equipment used on-site.
  • Conducted regular performance reviews with crew members.
  • Inspected tools, materials, and equipment to ensure quality standards were met.
  • Developed and implemented strategies to improve team productivity.
  • Communicated with employees to demonstrate high standards and mitigate issues.
  • Supervised projects to uphold schedule requirements and quality demands.
  • Reviewed project blueprints and specifications to determine number of workers needed to complete jobs.
  • Created work crew schedules and delegated assignments.
  • Reported project progress, site problems and labor status to supervisors.
  • Trained and monitored employees to teach daily tasks and improve performance.
  • Delegated duties to employees based on skillset.
  • Kept production team moving forward for progress in daily site operations.
  • Delegated work to staff, setting priorities and goals.
  • Kept detailed progress records to hit strict deadlines and adjust plans.
  • Defined and monitored personnel and project schedules to ensure on-time project completion.
  • Provided leadership, insight and mentoring to newly hired employees to supply knowledge of various company programs.

Orbital Welder

Total Facility Solutions
Chandler
10.2021 - 05.2023
  • Repaired or replaced broken or worn parts using hand tools, power tools, and welding equipment.
  • Welded all kinds of stainless steel pipes in different positions, such as flat position and horizontal position.
  • Verified that all necessary joints were properly fitted before welding process began.
  • Fabricated pipes, fittings, valves, and related equipment in accordance with specifications.
  • Adjusted current levels on machines to achieve desired results while maintaining safety protocols.
  • Installed piping systems for gas delivery lines utilizing appropriate techniques for safe installation.
  • Tested assembled products to ensure proper operation and adherence to safety regulations.
  • Assisted other team members with troubleshooting any problems encountered during production runs.
  • Determined optimal positioning of components prior to commencement of welding operations.
  • Measured angles accurately with protractors during fitting operations.
  • Maintained a clean work area by removing debris and cleaning up spilled materials.
  • Cleaned and prepared surfaces of metal components prior to welding.
  • Provided guidance to apprentices regarding best practices when performing tasks.
  • Monitored gas and argon levels at each stage during the entire welding process.
  • Inspected finished welds for accuracy and quality assurance standards.
  • Prevented breakdowns by keeping equipment clean and well-maintained for upcoming jobs.
  • Joined components with job-specific welding techniques.
  • Completed skilled welds on pressure-tested pipe in installations.
  • Performed pipe welding activities according to blueprints and technical drawings.
  • Worked on and off ladders and MEWPs.

SAFETY

BEARD MECHANICAL
AUSTIN
06.2021 - 08.2021
  • Conducted weekly safety meetings with crew members to reinforce safety protocols.
  • Developed strategies to improve workplace safety by creating safety protocols and conducting safety audits.
  • Established safety procedures and took action to minimize safety incidents on farm.
  • Ensured safety of employees by overseeing the implementation of safety protocols.
  • Ensured safety of personnel by enforcing safety rules in the workplace.
  • Attended safety meetings and toolbox talks to increase safety awareness.
  • Reviewed safety protocols regularly and conducted safety inspections of all areas.
  • Conducted regular safety audits to ensure compliance with established safety protocols.
  • Conducted safety meetings with operators regarding safety protocols at the plant site.
  • Participated in safety meetings and followed all safety guidelines.
  • Conducted safety checks before, during, and after DEMO PROJECTS to ensure everyone's safety.
  • Collaborated with safety personnel to develop and maintain safety policies and procedures.
  • Trained employees and managers in standard safety procedures, use of safety equipment and behavior-based safety observation techniques.

Journeyman Pipefitter

BEARD MECHANICAL
AUSTIN
05.2021 - 06.2021
  • Assist in the design process for new pipe system installations.
  • Perform installation, maintenance, and repair of pipes and pipe systems in industrial settings.
  • Coordinate with other tradespeople to complete projects within specified deadlines.
  • Cut, thread and assemble various types of piping materials such as copper, steel or plastic.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Follow safety protocols when working with hazardous materials such as acids or caustics.
  • worked on/ off MEWP

Journeyman Pipefitter

JACK B HENDERSON
CHANDLER
03.2021 - 04.2021
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Install supports for pipes to keep them in place during installation process.
  • Measure, cut, thread, groove, bend and install piping according to specifications.

ORBITAL WELDER

JACK B HENDERSON
Manassas
04.2020 - 11.2020
  • orbital welded stainless steel tube from 1/4" up to 3"
  • Identified potential problems before they occurred by inspecting all components prior to beginning any welding process.
  • Researched latest advances in orbital welding technology to remain current on industry trends.
  • Maintained welding logs and records of completed tasks.
  • Operated various types of power tools safely while performing repairs or modifications on machinery parts.
  • Cleaned work area after completion of job to ensure safety standards were met.
  • Adjusted welding machines according to type of metal being welded and specified amperage, voltage, and speed settings.
  • Set up and operated orbital welding equipment to weld components in accordance with blueprints, engineering drawings and work orders.
  • Monitored production progress against established timelines to ensure quality control objectives were met.
  • Inspected welds for conformance to specifications using x-ray, ultrasonic or other nondestructive testing methods.
  • Calibrated gauges used in measuring parameters during the orbital welding process.
  • Cut openings in walls or floors to accommodate pipes and fittings.
  • Tested pipe systems for leaks using air and water pressure gauges.
  • Assisted apprentices with learning basic skills such as orbital welding, PVC gluing, pro pressing, and soldering, and brazing pipes or installing valves.
  • Cut and beveled piping using cutting saws and pipe cutters
  • installed 4" - 6" PVC and CPVC pipe for drains, water line mains, and vacuum
  • used glue and primer for PVC and CPVC pipe systems
  • Read blueprints accurately to determine dimensions of piping required for installation projects.
  • Completed walk-throughs of completed systems to verify completion of work
  • Followed relevant codes, regulations, and safety techniques.
  • Used power tools to create assemblies and sub-assemblies.
  • Maintained tools and equipment to keep supplies in excellent working condition.

Steward

Universitiy Mechanical
Chandler
11.2019 - 04.2020
  • Resolved members complaints and issues in a timely manner while upholding UA and company standards.
  • helped new hires with advice of company/contractor and job site rules, conditions, and hazards
  • Maintained calendars of upcoming events, meetings and deadlines.

upheld our UA contract

  • Consulted with managers to resolve problems relating to employee performance, equipment and work schedules.
  • helped sick/injured members by collecting monetary donations to help with their "time off" while getting better

Journeyman Pipefitter

University Mechanical Contractors Inc.
CHANDLER
03.2018 - 04.2020
  • Assist in the design process for new pipe system installations.
  • Perform installation, maintenance, and repair of pipes and pipe systems in industrial settings.
  • Maintain and troubleshoot a variety of piping systems including steam, air, water, gas, oil and hydraulic lines.
  • Coordinate with other tradespeople to complete projects within specified deadlines.
  • Cut, thread and assemble various types of piping materials such as copper, steel or plastic.
  • Clean up work areas upon completion of tasks ensuring all tools are put away properly.
  • Train apprentices on safe practices when working with piping systems.
  • Follow safety protocols when working with hazardous materials such as acids or caustics.
  • Assemble and install valves, fittings, flanges and other related components.
  • Conduct pressure tests on newly installed systems to ensure proper functioning before use by personnel or customers.
  • Repair leaks in existing plumbing systems utilizing appropriate methods such as soldering or brazing, gluing
  • Read blueprints to determine the layout of each project.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • install hangers for different pipe systems

Steamfitter

JACK B HENDERSON
Chandler
06.2017 - 11.2017
  • Install supports for pipes to keep them in place during installation process.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Filled piping systems with water and air to test for leaks.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Observed safe work rules and utilized fall protection and PPE.
  • Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Verified and gathered measurements to determine proper piping sizes. Cut diverse pipe sizes and lengths to prepare for installation.

Pipefitter

Southland Industries
MESA
03.2017 - 06.2017
  • Constructed water distribution systems from blueprints.
  • Repaired or replaced worn parts such as washers, gaskets, and seals in plumbing system components.
  • Fabricated and assembled pipe sections for steam and hot-water heating systems.
  • Read blueprints to determine layout of plumbing systems; identify required materials; measure distances between cutting points; calculate angles for connections.
  • Observed safety precautions while working with hazardous chemicals.
  • Tested pipe systems for proper functioning after installation or repair.
  • Used power tools to create assemblies and sub-assemblies.
  • Identified and located required tools prior to starting each project.
  • Assembled and installed metal and nonmetal valves, pipe fittings and pipes.
  • Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
  • Cut and beveled piping using cutting torches, saws and threading machines.
  • Adjusted flux and solder temperatures as necessary for specific soldering jobs.
  • Cleaned work areas to maintain a safe working environment.
  • Set up soldering stations with appropriate tools, materials, and equipment.
  • Worked on/off ladders, MEWP,

Pipefitter

M. J. ELECTRIC
SPRINGERVILLE
07.2016 - 09.2016
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Repair or replace worn parts such as seals and bearings on pumps and valves.
  • Install supports for pipes to keep them in place during installation process.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Worked on/off ladders, MEWP, and boom lifts
  • Erected rigging systems to safely lower large sections of timber.
  • Dismantled rigging hardware after each event in an efficient manner.

Pipe Fitter

Kinetics Systems
Cupertino
12.2015 - 04.2016
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Install supports for pipes to keep them in place during installation process.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Trained in the installation of PEX tube and testing
  • worked on/off ladders, MEWPs, and boom lifts

Pipefitter

M. J. ELECTRIC
SPRINGERVILLE
10.2015 - 12.2015
  • Test pipe systems for leaks using air pressure gauges or other testing devices.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • tube bending stainless steel tubing for stackers
  • threading galvanized pipe for air and sprinkler systems
  • work on/off ladders, MEWPs, boom lifts, for tube, hangers, and pipe installations
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Repair or replace worn parts such as seals and bearings on pumps and valves.
  • Measure, cut, thread, groove, bend and install piping according to specifications.

Pipefitter

Total Facility Solutions
Malta
05.2014 - 10.2014
  • Test pipe systems for leaks using air pressure gauges or other testing devices.
  • Keep up-to-date with new technologies related to pipefitting industry.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Install supports for pipes to keep them in place during installation process.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
  • worked on/off ladders and MEWP

Pipefitter

Total Facility Solutions
Chandler
04.2013 - 05.2014
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Install supports for pipes to keep them in place during installation process.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining
  • worked on/off ladders, MEWp, and boom lifts
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.

Pipefitter

Harris Mechanical
Yuma
01.2013 - 04.2013
  • Read blueprints, sketches and job orders to determine the specific welding requirements.
  • Follow safety protocols at all times while operating equipment and working with hazardous materials.
  • Set up welding machines according to specifications by adjusting current and voltage; selecting correct filler rods and fluxes; and setting gas flow rate.
  • Operate forklifts or cranes when moving large items from one location to another.
  • Communicate with supervisors regarding problems encountered during assigned tasks.
  • Inspect completed welds to ensure they meet standards or specifications.
  • Test welded surfaces to evaluate strength of joints.
  • Transport equipment between work areas when required, using forklifts
  • Maintain an adequate supply of filler metals for use in the welding process.
  • Clean work area after completing assignments.
  • Provide assistance to other welders during complex projects involving multiple steps.
  • Assist in laying out, cutting, fabricating and fitting of metal components prior to welding.
  • Check for proper fit of parts before beginning any welding operation.
  • Position pieces to be welded into jigs, holding fixtures or other type of supports as needed.
  • working on/off ladders, MEWP, and knuckle boom
  • Followed safety procedures with equipment to prevent injuries and accomplish tasks on time.
  • Prevented distortion of parts by monitoring fitting, burning, and welding processes.

Pipefitter

University Mechanical Contractors Inc.
Chandler
05.2011 - 11.2012
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Test pipe systems for leaks using air pressure gauges, or other testing devices.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Install supports for pipes to keep them in place during installation process.
  • work on/ off ladders, MEWP

Pipefitter

Kinetics Systems
Chandler
11.2007 - 04.2011
  • Test pipe systems for leaks using air pressure gauges or other testing devices.
  • Keep up-to-date with new technologies related to pipefitting industry.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Install, maintain, and repair pipes used in heating, cooling, lubricating, sprinkler systems, manufacturing processes, and waste disposal.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Threaded and installed pipe using pipe wrench and dies.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Measured and marked pipes for cutting and threading.
  • Filled piping systems with water and air to test for leaks.
  • Cut diverse pipe sizes and lengths to prepare for installation.
  • Using blueprints, laid out scale drawings of pipe systems and supports.
  • Installed supports from ceiling joists to secure pipes in place.
  • worked on/off ladders, MEWP, and knuckle boom

Pipefitetr

Harder Mechanical
Chandler
07.2007 - 08.2007
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Test pipe systems for leaks using air pressure gauges or other testing devices.
  • Install supports for pipes to keep them in place during installation process.
  • working on/ off ladders

Pipefitter

University Mechanical Contractors Inc.
Phoenix
02.2006 - 05.2007
  • Measure, cut, thread, groove, bend, solder, braze, and install piping according to specifications.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Test different pipe systems for leaks using air pressure, water gauges, or other testing devices.
  • Fabricate carbon steel and stainless steel for welders.
  • Install different types of pipe systems.
  • Drill overhead and on floors to install hangers.
  • Work on/off ladders, MEWP, and knuckle booms.
  • Welded PVDF pipe systems for underground installations.
  • Work with the backhoe operator to do all the trench work for the plumbers.
  • Installed piping systems for plumbing for both domestic and HVAC lines.
  • Inspected installations to repair leaks and make adjustments to pipes.
  • Verified and gathered measurements to determine proper piping sizes.
  • Inspected work sites for holes and damage.

Apprentice

University Mechanical Contractors Inc., Kinetics
PHOENIX
07.2000 - 02.2006
  • Utilized problem-solving skills to identify and resolve apprenticeship program issues.
  • Assisted in preparing project plans and schedules to ensure timely execution.
  • Shadowed experienced professionals to gain practical knowledge of industry standards.
  • Completed daily administrative tasks including filing documents and processing paperwork.
  • Operated hand and power tools for various job aspects under professional supervision.
  • Maintained tools and equipment, ensuring optimal working condition at all times.
  • Participated in quality assurance checks to guarantee adherence to industry standards.
  • Embraced ongoing education through workshops to enhance technical knowledge.
  • learned to test diverse pipe systems
  • Learned to miter stainless steel pipe for pharmaceutical projects.

Education

GED -

PHOENIX CALL-A-TEEN
PHOENIX
03-2000

Skills

  • Pipe installation and maintenance
  • Blueprint reading and interpretation
  • Welding techniques and fabrication
  • Safety compliance and procedures
  • Project management and leadership
  • Conflict resolution and problem solving
  • Collaboration and teamwork skills
  • Time management and prioritization
  • Quality assurance and control
  • Forklift operation and safety
  • Inventory management and material selection
  • Piping layout and assembly techniques
  • System testing and pressure testing
  • Pipe threading and alignment
  • Flange assembly and valve installation
  • Hydronic systems expertise
  • Oxy-acetylene cutting techniques
  • Tubing installation and pipe cutting
  • Rigging, setting, and construction compliance
  • Waste disposal systems knowledge
  • Effective communication skills

Affiliations

  • cooking
  • problem solving
  • willingness to learn

Accomplishments

foreman

general foreman

field super intendent

Certification

  • SOLDER
  • BRAZING
  • PVDF
  • ORBITAL WELDING
  • PVC BONDING
  • FOREMAN/GF CERTS

Languages

English
Professional
Spanish
Professional
SIGN LANGUAGE
Limited

References

References available upon request.

Timeline

STEAMFITTER

TWEET GAROT
02.2025 - 04.2025

Field Superintendent

JACK B HENDERSON (JBH)
08.2024 - 02.2025

General Foreman

JBH
09.2023 - 08.2024

General Foreman

Kinetics Systems
11.2022 - 09.2023

Foreman

Kinetics Systems
07.2022 - 09.2023

Orbital Welder

Total Facility Solutions
10.2021 - 05.2023

SAFETY

BEARD MECHANICAL
06.2021 - 08.2021

Journeyman Pipefitter

BEARD MECHANICAL
05.2021 - 06.2021

Journeyman Pipefitter

JACK B HENDERSON
03.2021 - 04.2021

ORBITAL WELDER

JACK B HENDERSON
04.2020 - 11.2020

Steward

Universitiy Mechanical
11.2019 - 04.2020

Journeyman Pipefitter

University Mechanical Contractors Inc.
03.2018 - 04.2020

Steamfitter

JACK B HENDERSON
06.2017 - 11.2017

Pipefitter

Southland Industries
03.2017 - 06.2017

Pipefitter

M. J. ELECTRIC
07.2016 - 09.2016

Pipe Fitter

Kinetics Systems
12.2015 - 04.2016

Pipefitter

M. J. ELECTRIC
10.2015 - 12.2015

Pipefitter

Total Facility Solutions
05.2014 - 10.2014

Pipefitter

Total Facility Solutions
04.2013 - 05.2014

Pipefitter

Harris Mechanical
01.2013 - 04.2013

Pipefitter

University Mechanical Contractors Inc.
05.2011 - 11.2012

Pipefitter

Kinetics Systems
11.2007 - 04.2011

Pipefitetr

Harder Mechanical
07.2007 - 08.2007

Pipefitter

University Mechanical Contractors Inc.
02.2006 - 05.2007

Apprentice

University Mechanical Contractors Inc., Kinetics
07.2000 - 02.2006

GED -

PHOENIX CALL-A-TEEN
DELIA MAURICIO