Summary
Overview
Work History
Education
Skills
Timeline
Generic

Derwin Bahe

Many Farms

Summary

Experienced journeyman pipefitter with a strong focus on piping installation, pressure testing, and safety protocol adherence. Proven ability to perform regular inspections and maintain compliance in industrial settings.

Overview

17
17
years of professional experience

Work History

Journeyman Pipefitter

Phoenix Industrial
Golden Valley
03.2025 - 08.2025
  • Installed piping systems according to specifications and project requirements.
  • Operated threading machines and pipe benders for precise fittings.
  • Conducted regular inspections to maintain safety standards and compliance.
  • Followed safety protocols to minimize risks during installation tasks.
  • Threaded pipes using specified machinery.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • Replace worn parts such as seals or gaskets in pumps or valves.
  • Read blueprints to determine the layout of each project.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Assemble and install valves, fittings, flanges and other related components.
  • Perform installation, maintenance, and repair of pipes and pipe systems in industrial settings.
  • Observed safe work rules and utilized fall protection and PPE.
  • Train new employees on safe practices when working with piping systems.
  • Cut, thread and assemble various types of piping materials such as copper, steel or plastic.
  • Verified and gathered measurements to determine proper piping sizes.
  • Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
  • Performed rigging and forklift operations to maneuver parts and machinery.
  • Inspected installed systems using hydrostatic testing or pressure gauges.

Journeyman Pipefitter

The Industrial Company, TIC
Delta
08.2023 - 11.2024
  • Installed piping systems according to specifications and project requirements.
  • Operated threading machines and pipe benders for precise fittings.
  • Conducted regular inspections to maintain safety standards and compliance.
  • Followed safety protocols to minimize risks during installation tasks.
  • Threaded pipes using specified machinery.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • Replace worn parts such as seals or gaskets in pumps or valves.
  • Read blueprints to determine the layout of each project.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Assemble and install valves, fittings, flanges and other related components.
  • Perform installation, maintenance, and repair of pipes and pipe systems in industrial settings.
  • Observed safe work rules and utilized fall protection and PPE.
  • Train new employees on safe practices when working with piping systems.
  • Cut, thread and assemble various types of piping materials such as copper, steel or plastic.
  • Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
  • Performed rigging and forklift operations to maneuver parts and machinery.
  • Filled piping systems with water and air to test for leaks.
  • Inspected installed systems using hydrostatic testing or pressure gauges.

pipefitter craftsman

The Industrial Company, TIC
Portland
12.2019 - 05.2021
  • Operated various hand tools and machinery for pipe fitting tasks.
  • Conducted inspections of piping systems for leaks and maintenance needs.
  • Followed industry standards to ensure compliance in all installations.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Observed safe work rules and utilized fall protection and PPE.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Measured and marked pipes for cutting and threading.
  • Threaded pipes using specified machinery.
  • Install supports for pipes to keep them in place during installation process.
  • Threaded and installed pipe using pipe wrench and dies.
  • Repair or replace worn parts such as seals and bearings on pumps and valves.
  • Used valve keys and wrenches to turn valves and shut off water from pipe sections.
  • Performed rigging and forklift operations to maneuver parts and machinery.
  • Verified and gathered measurements to determine proper piping sizes.
  • Cut or threaded pipes to blueprint or drawing specifications.
  • Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
  • Filled piping systems with water and air to test for leaks.
  • Maintained a clean and organized workspace for safety.
  • Measured and marked material for cutting and drilling according to specifications.

Pipefitter Apprentice

The Industrial Company, TIC
Safford
05.2019 - 08.2019
  • Followed safety protocols and best practices for pipefitting tasks.
  • Utilized hand tools and power tools for cutting and fitting pipes.
  • Observed safe work rules and utilized fall protection and PPE.
  • Threaded pipes using specified machinery.
  • Tested piping systems for leaks using pressure gauges and other testing equipment.
  • Used hand tools such as wrenches, hammers and screwdrivers correctly when assembling pipes or fittings.
  • Assisted journeymen Pipefitters with complex fabrication projects requiring specialized skillsets.
  • Measured and marked pipes for cutting and threading and demonstrated knowledge and skills in safe rigging practices.
  • Used and maintained fusion equipment and pipefitting hand tools.
  • Verified and gathered measurements to determine proper piping sizes.
  • Filled piping systems with water and air to test for leaks.
  • Performed rigging and forklift operations to maneuver parts and machinery.

Pipefitter Apprentice

The Industrial Company, TIC
Wheatland
08.2018 - 05.2019
  • Followed safety protocols and best practices for pipefitting tasks.
  • Utilized hand tools and power tools for cutting and fitting pipes.
  • Observed safe work rules and utilized fall protection and PPE.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • Threaded pipes using specified machinery.
  • Tested piping systems for leaks using pressure gauges and other testing equipment.
  • Used hand tools such as wrenches, hammers and screwdrivers correctly when assembling pipes or fittings.
  • Attended training sessions conducted by experienced Pipefitters to acquire knowledge about industry best practices.
  • Assisted journeymen Pipefitters with complex fabrication projects requiring specialized skillsets.
  • Measured and marked pipes for cutting and threading and demonstrated knowledge and skills in safe rigging practices.
  • Used and maintained fusion equipment and pipefitting hand tools.
  • Verified and gathered measurements to determine proper piping sizes.
  • Filled piping systems with water and air to test for leaks.

Scaffold Builder

Classic Industrial
Farmington
03.2017 - 02.2018
  • Assembled and disassembled scaffold components according to safety regulations.
  • Inspected scaffolding for stability and compliance with safety standards.
  • Operated lifting equipment to position scaffolding materials effectively.
  • Maintained tools and equipment in safe, operational condition.
  • Transported tools, supplies, and materials needed for erecting or dismantling scaffolds using hand trucks or forklifts.
  • Installed guardrails, planks, ladders, and other safety equipment on scaffolds.
  • Set up staging areas for materials and tools used in construction projects involving scaffolding.
  • Tied off all loose ends when constructing or deconstructing a scaffold structure with rope, wire ropes, chains to ensure stability.
  • Cut down boards and plywood panels to meet appropriate size requirements.

Pipefitter/Boilermaker Helper

LPR Construction Co.
Sinclair
07.2016 - 11.2016
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Observed safe work rules and utilized fall protection and PPE.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Measured and marked pipes for cutting and threading.
  • Threaded pipes using specified machinery.
  • Threaded and installed pipe using pipe wrench and dies.
  • Used valve keys and wrenches to turn valves and shut off water from pipe sections.
  • Verified and gathered measurements to determine proper piping sizes.
  • Cut or threaded pipes to blueprint or drawing specifications.
  • Performed rigging and forklift operations to maneuver parts and machinery.
  • Tightened bolts on pipe flanges to ensure secure connections between pipes.
  • Cut metal parts using oxy-acetylene cutting torches or plasma arc cutters.
  • Cleaned work areas before beginning each job task.
  • Identified issues and brought to attention of foreman.
  • Worked with team to lift heavy sections into place using rigging and signals.

Pipefitter Helper

LAUREN ENGINEERS & CONSTRUCTORS INC.
Woods Cross
08.2015 - 06.2016
  • Operated hand tools and power tools for pipe cutting and fitting tasks.
  • Prepared work areas by cleaning and organizing tools and materials.
  • Assisted Pipefitters in measuring, cutting, and threading pipes for installation.
  • Grinded welds to ensure a smooth finish on the surface of the pipes.
  • Replaced worn parts such as gaskets, valves, seals and other components.
  • Tested installed piping systems for leaks using air pressure gauges.
  • Installed piping systems including valves, flanges, pressure gauges and thermometers.
  • Used and maintained fusion equipment and pipefitting hand tools.
  • Threaded pipes using specified machinery.
  • Performed rigging and forklift operations to maneuver parts and machinery.

Carpenter's Helper

Sundt Construction
Winnemucca
04.2015 - 05.2015
  • Assisted carpenters in measuring and cutting materials for various projects.
  • Loaded and unloaded materials, ensuring availability for ongoing projects.
  • Followed safety protocols to protect self and others on construction sites.
  • Prepared job sites by clearing debris and setting up necessary tools and materials.
  • Cut materials on job site to prepare for installation.
  • Followed OSHA and corporate safety regulations and procedures.
  • Operated hand tools, saws, routers and sanding equipment to prepare materials and finish project surfaces.
  • Performed tie spacing layout to measure, mark and cut material.

Carpenter's Helper

Sundt Construction
Morenci
03.2014 - 11.2014
  • Assisted carpenters in measuring and cutting materials for various projects.
  • Helped with movement of materials and equipment to different job sites.
  • Installed, assembled and repaired woodwork, millwork, cabinetry, and trim under supervision of master carpenter.
  • Followed OSHA and corporate safety regulations and procedures.
  • Operated hand tools, saws, routers and sanding equipment to prepare materials and finish project surfaces.
  • Sanded surfaces to remove ridges, tool marks and glue.
  • Performed tie spacing layout to measure, mark and cut material.
  • Helped establish accurate reference points and lines with skilled use of plumb bobs and sighting rods.

Carpenter's Helper

Sundt Construction
Big Piney
10.2013 - 03.2014
  • Assisted carpenters in measuring and cutting materials for various projects.
  • Loaded and unloaded materials, ensuring availability for ongoing projects.
  • Followed safety protocols to protect self and others on construction sites.
  • Helped with movement of materials and equipment to different job sites.
  • Installed, assembled and repaired woodwork, millwork, cabinetry, and trim under supervision of master carpenter.
  • Followed OSHA and corporate safety regulations and procedures.
  • Operated hand tools, saws, routers and sanding equipment to prepare materials and finish project surfaces.
  • Completed basic and semi-skilled work under direction of fully qualified carpenter.
  • Followed carpenter directions and work order information.
  • Performed tie spacing layout to measure, mark and cut material.
  • Helped establish accurate reference points and lines with skilled use of plumb bobs and sighting rods.

Carpenter's Helper

The ind
Williston
07.2012 - 10.2013
  • Assisted carpenters in measuring and cutting materials for various projects.
  • Loaded and unloaded materials, ensuring availability for ongoing projects.
  • Helped with movement of materials and equipment to different job sites.
  • Installed, assembled and repaired woodwork, millwork, cabinetry, and trim under supervision of master carpenter.
  • Followed OSHA and corporate safety regulations and procedures.
  • Operated hand tools, saws, routers and sanding equipment to prepare materials and finish project surfaces.
  • Completed basic and semi-skilled work under direction of fully qualified carpenter.
  • Followed carpenter directions and work order information.
  • Performed tie spacing layout to measure, mark and cut material.
  • Helped establish accurate reference points and lines with skilled use of plumb bobs and sighting rods.

Carpenter's Helper

The Industrial Company, TIC
Casper
04.2011 - 07.2012
  • Assisted carpenters in measuring and cutting materials for various projects.
  • Loaded and unloaded materials, ensuring availability for ongoing projects.
  • Followed safety protocols to protect self and others on construction sites.
  • Prepared job sites by clearing debris and setting up necessary tools and materials.
  • Helped with movement of materials and equipment to different job sites.
  • Installed, assembled and repaired woodwork, millwork, cabinetry, and trim under supervision of master carpenter.
  • Followed OSHA and corporate safety regulations and procedures.
  • Operated hand tools, saws, routers and sanding equipment to prepare materials and finish project surfaces.
  • Completed basic and semi-skilled work under direction of fully qualified carpenter.
  • Followed carpenter directions and work order information.
  • Helped establish accurate reference points and lines with skilled use of plumb bobs and sighting rods.

Carpenter Laborer

The Industrial Company, TIC
Newcastle
02.2011 - 04.2011
  • Operated power tools and hand tools efficiently for various carpentry tasks.
  • Assisted carpenters in measuring, cutting, and fitting lumber for construction projects.
  • Installed and constructed wooden framework for buildings, walls, doors, and other structures.
  • Used manual saws and other hand tools to shape and cut pieces of wood according to specifications.
  • Loaded and unloaded building materials from trucks with a crane or hoist.
  • Used hand tools, portable power tools and standard measuring instruments to complete daily tasks.
  • Reviewed and interpreted blueprints, drawings and models to verify specifications.
  • Measured and marked cut lines on materials using ruler or marking gauge.
  • Worked independently on projects and tasks within carpentry team.
  • Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.

Carpenter Laborer

The Industrial Company, TIC
Big Piney
01.2011 - 04.2011
  • Operated power tools and hand tools efficiently for various carpentry tasks.
  • Assisted skilled carpenters with framing, drywall installation, and finishing work.
  • Followed blueprints and specifications to ensure accurate construction assembly.
  • Assisted carpenters in measuring, cutting, and fitting lumber for construction projects.
  • Installed and constructed wooden framework for buildings, walls, doors, and other structures.
  • Used manual saws and other hand tools to shape and cut pieces of wood according to specifications.
  • Loaded and unloaded building materials from trucks with a crane or hoist.
  • Calculated dimensions, angles and required materials to support consistency and accuracy throughout projects.
  • Reviewed and interpreted blueprints, drawings and models to verify specifications.
  • Measured and marked cut lines on materials using ruler or marking gauge.
  • Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
  • Worked independently on projects and tasks within carpentry team.
  • Studied blueprints or building plans to prepare layout and materials required.
  • Verified trueness of construction using plumb and level.
  • Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.

Carpenter Laborer

The Industrial Company, TIC
Gillette
10.2010 - 11.2010
  • Operated power tools and hand tools efficiently for various carpentry tasks.
  • Assisted skilled carpenters with framing, drywall installation, and finishing work.
  • Followed blueprints and specifications to ensure accurate construction assembly.
  • Assisted carpenters in measuring, cutting, and fitting lumber for construction projects.
  • Installed and constructed wooden framework for buildings, walls, doors, and other structures.
  • Loaded and unloaded building materials from trucks with a crane or hoist.
  • Used hand tools, portable power tools and standard measuring instruments to complete daily tasks.
  • Aligned and squared frames and forms for installation.
  • Measured and marked cut lines on materials using ruler or marking gauge.
  • Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
  • Worked independently on projects and tasks within carpentry team.
  • Studied blueprints or building plans to prepare layout and materials required.
  • Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.

Carpenter Laborer

The Industrial Company, TIC
Casper
04.2010 - 06.2010
  • Operated power tools and hand tools efficiently for various carpentry tasks.
  • Assisted skilled carpenters with framing, drywall installation, and finishing work.
  • Assisted carpenters in measuring, cutting, and fitting lumber for construction projects.
  • Used manual saws and other hand tools to shape and cut pieces of wood according to specifications.
  • Loaded and unloaded building materials from trucks with a crane or hoist.
  • Used hand tools, portable power tools and standard measuring instruments to complete daily tasks.
  • Measured and marked cut lines on materials using ruler or marking gauge.
  • Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.

Carpenter Laborer

The Industrial Company, TIC
Newcastle
12.2009 - 02.2010
  • Operated power tools and hand tools efficiently for various carpentry tasks.
  • Assisted carpenters in measuring, cutting, and fitting lumber for construction projects.
  • Used manual saws and other hand tools to shape and cut pieces of wood according to specifications.
  • Loaded and unloaded building materials from trucks with a crane or hoist.
  • Used hand tools, portable power tools and standard measuring instruments to complete daily tasks.
  • Measured and marked cut lines on materials using ruler or marking gauge.
  • Worked independently on projects and tasks within carpentry team.
  • Studied blueprints or building plans to prepare layout and materials required.
  • Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.

Laborer

Navajo Engineering & Construction
Chinle
12.2009 - 02.2010
  • Assisted team members in lifting and moving materials safely.
  • Followed safety protocols to minimize hazards during operations.
  • Loaded and unloaded materials from trucks and storage areas.
  • Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
  • Completed variety of physical labor tasks.
  • Lifted objects weighing up to 50 pounds without assistance when necessary.
  • Worked with team members to ensure efficient workflow throughout the day.
  • Operated and maintained a variety of equipment including hand and power tools.
  • Used picks and shovels to dig, spread, and level dirt and gravel.
  • Operated various power tools such as drills and saws safely while following manufacturer's instructions.
  • Met company and OSHA safety guidelines for work site operations to minimize worker risk.
  • Mixed, poured, and spread concrete, asphalt gravel, and other materials.

Carpenter Laborer

the indus
Rawlins
09.2009 - 12.2009
  • Operated power tools and hand tools efficiently for various carpentry tasks.
  • Followed blueprints and specifications to ensure accurate construction assembly.
  • Assisted carpenters in measuring, cutting, and fitting lumber for construction projects.
  • Used manual saws and other hand tools to shape and cut pieces of wood according to specifications.
  • Loaded and unloaded building materials from trucks with a crane or hoist.
  • Used hand tools, portable power tools and standard measuring instruments to complete daily tasks.
  • Measured and marked cut lines on materials using ruler or marking gauge.
  • Studied blueprints or building plans to prepare layout and materials required.
  • Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.

Carpenter Laborer

The Industrial Company, TIC
Rawlins
05.2008 - 08.2008
  • Operated power tools and hand tools efficiently for various carpentry tasks.
  • Assisted carpenters in measuring, cutting, and fitting lumber for construction projects.
  • Installed and constructed wooden framework for buildings, walls, doors, and other structures.
  • Loaded and unloaded building materials from trucks with a crane or hoist.
  • Used hand tools, portable power tools and standard measuring instruments to complete daily tasks.
  • Reviewed and interpreted blueprints, drawings and models to verify specifications.
  • Measured and marked cut lines on materials using ruler or marking gauge.
  • Worked independently on projects and tasks within carpentry team.
  • Studied blueprints or building plans to prepare layout and materials required.
  • Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.

Education

High School Diploma -

Rock Point High School
Rock Point, AZ
05-2008

Skills

  • Piping installation
  • Blueprint reading
  • Safety protocol adherence
  • Valve assembly
  • Pressure testing
  • Equipment operation
  • Pneumatic systems
  • Pipe fitting
  • Pipe alignment
  • Pipe rigging
  • Pipe testing
  • Flange assembly
  • Hand and power tools
  • Pipe supports
  • Pipe hangers
  • Pipe measuring
  • Valve installation
  • Industrial piping
  • Pipe grooving

Timeline

Journeyman Pipefitter

Phoenix Industrial
03.2025 - 08.2025

Journeyman Pipefitter

The Industrial Company, TIC
08.2023 - 11.2024

pipefitter craftsman

The Industrial Company, TIC
12.2019 - 05.2021

Pipefitter Apprentice

The Industrial Company, TIC
05.2019 - 08.2019

Pipefitter Apprentice

The Industrial Company, TIC
08.2018 - 05.2019

Scaffold Builder

Classic Industrial
03.2017 - 02.2018

Pipefitter/Boilermaker Helper

LPR Construction Co.
07.2016 - 11.2016

Pipefitter Helper

LAUREN ENGINEERS & CONSTRUCTORS INC.
08.2015 - 06.2016

Carpenter's Helper

Sundt Construction
04.2015 - 05.2015

Carpenter's Helper

Sundt Construction
03.2014 - 11.2014

Carpenter's Helper

Sundt Construction
10.2013 - 03.2014

Carpenter's Helper

The ind
07.2012 - 10.2013

Carpenter's Helper

The Industrial Company, TIC
04.2011 - 07.2012

Carpenter Laborer

The Industrial Company, TIC
02.2011 - 04.2011

Carpenter Laborer

The Industrial Company, TIC
01.2011 - 04.2011

Carpenter Laborer

The Industrial Company, TIC
10.2010 - 11.2010

Carpenter Laborer

The Industrial Company, TIC
04.2010 - 06.2010

Carpenter Laborer

The Industrial Company, TIC
12.2009 - 02.2010

Laborer

Navajo Engineering & Construction
12.2009 - 02.2010

Carpenter Laborer

the indus
09.2009 - 12.2009

Carpenter Laborer

The Industrial Company, TIC
05.2008 - 08.2008

High School Diploma -

Rock Point High School

Similar Profiles

CREATE PROFILE
Derwin Bahe