JAYVIN MOUNTAIN

Field Weld of schedule 10 stainless of 6, 8, 10 in pipe.

• Mentored junior welders, sharing knowledge to enhance their skill sets and career development.
• Enhanced welding quality by following precise welding procedures and maintaining proper equipment settings.

• Welding and assisting in prefabrication of various sizes of pipe.
• Pre-outage preparation and staging of material and tools to be used during refueling outage.
• Welding using SMAW/GTAW processes on pipes and Supports.

• Replacing worn and used pressure pipe systems in crude refinery., Welding 100% x-ray heavywall chromolly pipe.
• Rigging and fitting involved work.
• Fabricated shop parts directly from blueprints.

• Lay out and fabrication of tubes and tube wall sheets to be replace along furnace boiler walls.
• Rigging and fitting of replacement tubes to be installed using SMAW/ GTAW.
• Removed and repaired unacceptable welds with an air arc and grinder to meet quality guidelines.

• Welding and assiting in prefabrication of various sizes of pipe.
• Pre-outage preparation and staging of material and tools to be used during a refueling outage.
• Welding using SMAW/GTAW processes on pipes and Supports.

• Tour Guide- Giving a guided tour through canyons in the Antelope washes, giving knowledge and history facts about the canyon to groups of tourists.

• Welding and assiting in prefabrication of various sizes of pipe.
• Pre-outage preparation and staging of material and tools to be used during a refueling outage.
• Welding using SMAW/GTAW processes on pipes and Supports.

• Cutting out and replacing sample tubes at various areas of the furnace boiler.
• Assistance with Rigging and Transport of materials to be installed.
• All welding done with SMAW/GTAW processes.

• Welding 100% x-ray Heavywall pipe.
• fitting and welding small bore pipe.
• welding structural supports.

• Welding various size pipe.
• stainless, carbon,
• structural welding as needed for supports.

• welding heat transfer fluid 10 gauge stainless 2" pipe.
• using argon backing inert gas.
• Salvaged and rebuilt parts whenever possible.

• Welding Boiler Tubes cutting and lay out of new additions to High pressure steam headers.
• Removed and repaired unacceptable welds with an air arc and grinder to meet quality guidelines.

• welding and assisting with fits and lay out of small projects.
• certified in stainless and carbon 6G.

• replacing sample tubes and minor wear and tear fix ups on a coal fired power plant.
• Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.
• Inspected welds and checked that critical measurements met specifications upon completion.

• Reengineered designes, on going project pipe assignments welding and rigging some layout assistance to pipe fitters.
• Fabricated shop parts directly from blueprints.
• Inspected welds and checked that critical measurements met specifications upon completion.
• Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
• Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.
• Welded in flat, horizontal, vertical and overhead positions.
• Detected faulty operation of equipment and defective materials and promptly resolved issues.

• Replacing worn and used pressure pipe systems in crude refinery.
• Fabricated shop parts directly from blueprints.
• Inspected welds and checked that critical measurements met specifications upon completion.

• welding repairs to specific units in refineries.
• manual Labor.
• clean up.
• rigging and assistance to Pipe Fitters.

• welding heat exchanger vessles.
• repairs and updates to HTF units and Turbine.
• Assembled structural forms such as boiler parts and pressure vessels.

• Welding variouse size pipes, repairs to heat exchanger vessels.
• replace various valves throughout plant.
• handling of HTF (Hot Thermal Fluid).
• Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.

• Welding various size pipe using SMAW/GTAW processes.
• rigging and Certified Forklift operator.
• manual labor , clean up.

• Combination pipe welder- welding of various pipe sizes using SMAW/GTAW processes.
• Rigging and help with fitting and layout of pipe systems.
• Interpreted verbal and written instructions from work orders and welding blue prints.
• Fabricated shop parts directly from blueprints.

• Demo of sample tubes for wall thickness reading and replace using TIG welding.
• modifying and improving old repaires to wind boxes with structural welding.

• Emergency replacement of old worn tubes in a condensed boiler.
• Replaced in a timely manner and completion of other small emergency projects.

• Demo and rigging of Economizer tube bundles.
• rigging in and welding of new economizer Tube bundles.
• repair of old superheater tubes that are worn.

• Emergency replacing of tube leaks on the waterwalls.
• welding and completing tubes and waterwall for plant start up.

• Welding and rigging of waterwall panels.
• Replace old panels on different elevations of the boiler.
• Replacement of waterwall skin casing.

• Welding mild steel pipe using TIG applications.
• various size fuel lines.
• Bolting and replacing flange gaskets.

• Welding waterwall tubes and repairing cracks along waterwall membrane.
• Rigging and assisting other tube welding teams.

• Welding and rigging of coal silo's.
• Replace and MIG weld structual plates to worn walls of the silo's.
• Completing and replacing of all plates in timely manner.
• Examined the structure and texture of parts to detect imperfections.
• Inspected welds and checked that critical measurements met specifications upon completion.

• Repair of emergency tube leaks.
• patch work on skin casing to the Penthouse Boiler.
• Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
• Detected faulty operation of equipment and defective materials and promptly resolved issues.

• Welding stainless and chrome molly pipes in a refinery, practicing safe work habits and working well with co-workers.

• Welding and rigging of certain critical sample tubes.
• Replace and repairing of old skin casing.
• Completing and replacing of all welds timely manner.

• Early preparations of waterwall tubes and lay-out of demolition.
• Welding new waterwall panels in place of damaged or eroded walls due to high temperatures.
• All walls welded with TIG applications.

• Combination pipe welder- Welding of highly critical fuel lines using TIG and SMAW/Stick Welding applications.
• Required extra precautions due to refinery regulations.

• Required to read and lay-out structural supports and walk ways.
• Welding Using SMAW/Stick to secure structural supports.
• Removed rough spots from work pieces with portable grinders, hand files and scrapers.
• Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.
• Welded in flat, horizontal, vertical and overhead positions.
• Chipped off excess weld, slag, and spatter using hand tools.
• Examined the structure and texture of parts to detect imperfections.

• Welding high pressure tubes in various areas of the coal burning power Plant.
• Some rigging and fitting were also required.

• Welding and fitting of new tube bundles.
• Preparation and some minor Adjusting to fitting.
• Rigging also required.
• Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.

• Demolition of old worn tubes.
• Preparation and cleaning of stainless Steel tubes.
• Buddy welding critical tubes in tight areas.

• Welding high pressure tubes in economizer using TIG welding and SMAW/stick welding.
• Rigging and fitting also required.
• Detected faulty operation of equipment and defective materials and promptly resolved issues.
• Welded in flat, horizontal, vertical and overhead positions.
• Inspected welds and checked that critical measurements met specifications upon completion.

• Repairs made to existing gas lines using TIG welding.
• Bolting and tightening of flanges of various sizes.
• Removed and repaired unacceptable welds with an air arc and grinder to meet quality guidelines.
• Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.

• Fabricationing structural assignments using SMAW/stock welding Applications, Welding of various sizes of exotic pipe.
• Welded in flat, horizontal, vertical and overhead positions.
• Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.
• Inspected welds and checked that critical measurements met specifications upon completion.
• Interpreted verbal and written instructions from work orders and welding blue prints.

• High pressure tube welds to include waterwalls.
• Repairs made to skin Casing.
• Detected faulty operation of equipment and defective materials and promptly resolved issues.
• Salvaged and rebuilt parts whenever possible.

• Combination pipe welder- Welding of critical high pressure gas lines using heliarc and Tig Applications.
• Building supports using SMAW/stick welding.
• Fabricated shop parts directly from blueprints.
• Interpreted verbal and written instructions from work orders and welding blue prints.