Shawn Aguirre
Kingman
Summary
Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills. Hardworking employee with customer service, multitasking, and time management abilities. Devoted to giving every customer a positive and memorable experience.
Overview
16
16
years of professional experience
1
1
Certification
Work History
A&P Mechanic
Aerofield Avaition Services
Aurora
07.2025 - 02.2026
- Executed maintenance tasks on engines, airframes, and related systems to ensure operational readiness.
- Applied hand tools and diagnostic equipment for precise repairs and adjustments, enhancing safety and reliability.
- Collaborated with team members to ensure safety procedures were followed.
- Documented maintenance activities in compliance with regulatory standards.
- Maintained a clean and organized workspace for efficient operations.
- Updated supervisors on repair progress and needs to facilitate timely decision-making and resource allocation.
- Checked torque values of critical fasteners using calibrated torque wrenches.
- Utilized ground support equipment including hoists, jacks, and forklifts for various tasks.
A&P Mechanic/Quality Control Inspector
Ascent Aviation Services
Marana
02.2023 - 06.2025
- Performed routine maintenance on various aircraft to ensure safety standards.
- Inspected aircraft operations for safety hazards, ensuring adherence to safety regulations.
- Adhered to aviation regulations and company policies during all maintenance tasks.
- Trained junior mechanics on best practices and safety protocols to enhance team competency.
- Monitored shop equipment to maintain safe working condition.
- Adhered to all safety protocols and guidelines to prevent accidents and injuries.
- Removed old oil, replaced filters, and added correct amounts of fluids.
- Reviewed work orders and discussed with supervisors.
- Inspected aircraft components for defects, ensuring compliance with safety standards and quality assurance.
- Utilized specialized tools and equipment for precise measurements and assessments.
- Performed first article inspection on incoming raw materials.
- Analyzed plans, specifications and blueprints to understand product requirements.
- Notified supervisors or other relevant personnel of test or production issues.
- Oversaw disposal of products, materials and equipment not in compliance with tolerances, safety standards, or quality levels.
A&P Mechanic/Inspector/Supervisor
NextGen Aviaition Services
Chino
09.2021 - 02.2023
- Repaired and replaced defective parts using hand and power tools.
- Collaborated with team members to develop and implement streamlined maintenance procedures, improving overall efficiency.
- Assisted in training new mechanics on maintenance protocols and safety practices.
- Followed company policies for waste disposal and environmental safety measures.
- Assisted fellow mechanics during complex repairs.
- Organized tools and supplies neatly within the workspace for easy access during maintenance tasks.
- Maintained garage safety protocols to meet regulatory and company expectations.
- Completed required paperwork and delivered to the customer.
- Researched parts availability from vendors in order to complete repairs efficiently.
- Consulted with customers regarding service options available based upon their needs.
- Adhered to all safety protocols and guidelines to prevent accidents and injuries.
- Removed old oil, replaced filters, and added correct amounts of fluids.
- Planned work procedures using charts, technical manuals and experience.
- Reviewed inspection reports for accuracy and adherence to regulatory requirements.
- Implemented quality control measures to strengthen inspection processes, ensuring adherence to regulatory standards.
- Reported progress updates on inspection activities at weekly staff meetings.
- Maintained accurate records of inspections, findings, corrective actions, and other related documentation.
- Streamlined workflow processes, enhancing project completion times and improving team productivity.
- Fostered a positive and motivating work environment, leading to an increase in team morale.
- Ordered equipment parts and repair services during equipment breakdown to avoid further delays.
A&P Mechanic
Ascent Aviation Services
Marana
03.2019 - 09.2021
- C Checks
- Removing and Replacing Assisted with various tasks in aircraft maintenance.ircraft Components
- Conducted return to service inspections to verify compliance with safety standards.
- Performed storage checks to maintain aircraft readiness and compliance.
- Supported aircraft maintenance teams by executing assigned tasks.
- A
A&P Mechanic
Bombarbier
Tucson
02.2019 - 03.2019
- Performed C checks to ensure airworthiness and compliance with safety regulations.
- Removed and replaced aircraft components, enabling timely completion of maintenance tasks.
- Conducted inspections on aircraft systems and components for safety compliance.
- Performed scheduled maintenance and repairs on various aircraft models.
- Utilized specialized tools and equipment for troubleshooting mechanical issues.
Assembler
Honeywell
Phoenix
01.2019 - 02.2019
- Assembled components using hand tools and power equipment.
- Inspected products for quality and compliance with specifications.
- Collaborated with team members to complete assembly tasks on schedule.
- Maintained a clean and organized work area to promote safety.
- Followed detailed assembly instructions and diagrams for accuracy.
- Follow established assembly methods and procedures to ensure product quality standards are met.
- Inspect finished products for defects and conformance to customer requirements.
- Test assembled products for accuracy and functionality prior to final packaging.
- Notify supervisors of any potential issues that may cause delays in production schedules.
- Read and interpret blueprints, schematics, drawings, and work orders to determine the specific assembly instructions.
A&P Mechanic
JetPro Line Maintenance
San Jose
10.2018 - 01.2019
- Airport Line Maintenance
- MEL's 737-700-800
- Conducted maintenance on MEL's AirBus A320 aircraft.
- Utilized hand tools and diagnostic equipment for repairs and adjustments.
- Documented maintenance activities in compliance with regulatory standards.
A&P Mechanic
Kalitta Air, STS AIR
Oscoda
07.2018 - 10.2018
- Landing Gear Team 747-400.
- Conducted comprehensive C checks on aircraft components, verifying compliance with airworthiness standards.
- Performed maintenance tasks on engines, airframes, and related systems, contributing to overall aircraft reliability.
- Documented maintenance activities in compliance with regulatory standards.
- Collaborated with team members to uphold safety procedures, enhancing operational safety culture.
- Completed all required paperwork accurately following each task performed.
- Checked torque values of critical fasteners using calibrated torque wrenches.
A&P Mechanic
Kingman Airline Services
Kingman
03.2018 - 07.2018
- Return to Service Emj 135-145.
- Executed inventory checks of stored materials, ensuring accurate stock levels and availability for maintenance tasks.
- Performed maintenance tasks on engines, airframes, and related systems.
- Collaborated with team members to ensure safety procedures were followed.
- Documented maintenance activities, ensuring compliance with regulatory standards and facilitating adherence to safety protocols.
- Assisted in troubleshooting mechanical issues using technical manuals.
- Provided technical assistance to co-workers when requested.
- Checked torque values of critical fasteners using calibrated torque wrenches, ensuring engine reliability and safety during operations.
Machine Operator
Insteel Wire Products
Kingman
08.2017 - 03.2018
- Operated machinery to produce wire products according to specifications.
- Monitored production processes to uphold quality and efficiency standards.
- Conducted routine maintenance on equipment to reduce downtime and maintain operational readiness.
- Inspected finished products for defects and ensured compliance with safety regulations.
- Documented daily production activities and reported issues to supervisors.
- Trained new operators on safety protocols and machine operation procedures.
- Ensure that safety guidelines are followed at all times while operating machinery.
- Observe machine operations to detect any problems or defects in the finished product.
- Load raw materials into machines according to specified measurements.
- Comply with company policies regarding quality control procedures.
- Monitor the feed and speed of machines during the machining process.
- Inspect finished workpieces to ensure conformance with specifications.
- Perform periodic maintenance on machines such as cleaning and lubrication.
- Verified production orders prior to starting set-up.
- Replace worn tools, sharpen cutting tools, adjust machinery components.
Construction Laborer
Setter Construction
Tahoe City
06.2017 - 08.2017
- Assisted in framing and roofing tasks under skilled supervision.
- Ensured job site cleanliness by efficiently removing debris and organizing materials to support safe working conditions.
- Loaded and unloaded construction materials from trucks and storage areas.
- Supported skilled tradespeople by providing tools and equipment as needed.
- Operated a variety of hand and power tools to complete tasks such as sawing, drilling, hammering, and excavating.
- Used picks and shovels to dig, spread, and level dirt and gravel.
- Collected and removed debris from work sites to sustain team productivity and reduce safety hazards, contributing to a more efficient work environment.
- Maintained a safe work environment by adhering to safety regulations and guidelines.
- Installed ladders and temporary platforms at construction sites to facilitate safe access.
- Maintained clean, safe working environment by systematically removing debris from job site before shift completion, enhancing overall safety.
- Assisted in the installation of doors, windows, drywall, roofing systems, and other structural components.
- Met company and OSHA safety guidelines for work site operations to minimize worker risk.
Concrete Laborer
Simon Banuelos Construction
Oak Hills
03.2015 - 07.2017
- Mixed concrete according to specified ratios and job requirements.
- Operated tools like trowels, mixers, and vibrators for surface finishing.
- Facilitated formwork setup and removal to ensure timely and accurate concrete pours.
- Maintained cleanliness of worksite and organized materials efficiently.
- Followed safety protocols to minimize risks on the job site.
- Supported heavy lifting and placement of concrete elements as needed.
- Reported any issues or delays to supervisors promptly for resolution.
- Positioned wire mesh and rebar to reinforce concrete.
- Use shovels, hoes, rakes, and other tools to spread or level concrete.
- Poured concrete into forms using pump hose and leveled.
- Smooth out freshly poured concrete with trowels and other finishing tools.
- Set up and reinforced forms to accurately pour concrete for walkways and other structures.
- Carry heavy materials such as bricks, blocks, lumber, mortar mixers, and wheelbarrows across job sites safely.
- Worked with teammates to move steel forms.
- Operate power saws to cut expansion joints into hardened concrete surfaces.
- Assisted in demolishing existing structures using jackhammers and other tools.
- Level ground prior to pouring foundation or slab with shovels or grading machines.
- Measure and mark designated areas where new slabs are going to be placed.
- Remove any excess material from the surface of the concrete after it has been poured.
- Carry heavy materials such as bricks, blocks, lumber, mortar mixers.
- Established scaffolding, braces, and temporary structures to enhance crew safety and support during operations.
- Combined cement and mortar according to specified ratios to prepare for pouring activities at the job site.
- Compacted grade using jumping jack or plate compactor equipment.
- Set concrete forms to desired pitch and depth and aligned.
- Repaired unsafe curbs, gutters, sidewalks, driveways and roadways.
Heavy Steel Welder/General Laborer
MNC Construction
Hesperia
01.2014 - 02.2015
- Set up welding machines based on the job at hand.
- Repaired broken or cracked parts with cutting torches and welding equipment to restore functionality.
- Used welding skills to help repair and maintain heavy-duty machinery.
- Set up equipment and welded parts according to welding chart specifications and type.
- Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
- Applied shielded metal arc welding techniques with electrodes in flat, horizontal, and overhead positions.
- Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
- Inspected completed work for conformance to specifications using various instruments.
- Utilized oxyacetylene torches for preheating metals prior to welding or bending them into desired shapes.
- Prepared broken parts for welding by properly grooving and scarfing surfaces.
- Adjusted gas flow and pressure to create and maintain desired flames.
- Installed new plant equipment per manufacturer's instructions while adhering to safety protocols.
- Provided regular progress updates to supervisors to ensure alignment on project milestones.
- Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
- Cleaned and inspected parts and assemblies at each production stage and documented production defects.
- Safely ignited torches and monitored surroundings to proactively identify hazards.
- Selected and installed torches, filler rods and flux according to welding chart specifications.
- Maintained clean and safe work environment following safety protocols.
- Conducted routine maintenance checks on tools and equipment for optimal performance.
- Communicated with supervisors to ensure project requirements were met daily.
- Moved heavy objects using dollies, carts, hoists, or other manual labor techniques.
- Operated pallet jacks and forklifts to load and unload supplies and materials.
- Inspected tools and equipment for proper functioning prior to use.
- Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
- Cut materials into specified sizes for installation using tile cutters and power saws.
Cook/Kitchen Prep Cook
Dennys Restaurant
Barstow
02.2010 - 01.2014
- Prepared meals according to Dennys' standardized recipes and presentation guidelines.
- Operated cooking equipment, including grills, fryers, and ovens efficiently.
- Ensured cleanliness and organization of kitchen workstations to support efficient food preparation.
- Coordinated with team members to deliver timely meal service during peak hours, enhancing customer satisfaction.
- Followed food safety and sanitation procedures to uphold health standards.
- Assisted in inventory management by tracking stock levels and ordering supplies.
- Adapted menu items based on customer requests and dietary restrictions promptly.
- Trained new staff on kitchen procedures and safety protocols to maintain high standards and compliance.
- Prepared dishes in a fast-paced environment working with teammates to maintain high customer satisfaction rate.
- Operated ovens, fryers and mixers safely to prevent kitchen accidents and machinery malfunction.
- Wrapped, dated and labeled food items in storage for safety and freshness.
- Followed established procedures and requirements for safe food handling, storage and service.
- Chopped, diced and sliced vegetables and fruit ahead of rush periods.
- Used standardized recipes and other instructions to prepare food.
- Maintained safe operations of food prep equipment to reduce complications and retain safety procedures.
- Enforced proper sanitation practices to prevent spoiling or contamination of foods.
- Organized storage areas for efficient usage of space.
- Carried pans and trays of food to and from work stations, stove, and refrigerator.
- Managed portion control using correct utensils during preparation and plating.
- Resolved customer complaints regarding food quality or services provided.
- Coordinated orders to expedite food from kitchen according to cook time and delivery time.
- Set up and performed initial prep work for soups, sauces, and salads.
- Retained consistent quality and high accuracy when preparing identical dishes every day.
- Provided guidance to junior cooks regarding food preparation methods and techniques.
- Trained, managed and guided kitchen staff to improve overall performance, service quality and productivity.
- Coordinated with wait staff to ensure timely delivery of meals to customers.
- Monitored stock levels of food items and ordered more when necessary.
- Interacted with waitstaff regarding special orders for customers with food allergies and gluten intolerance.
- Performed basic administrative duties such as inventory management, ordering supplies.
- Ordered supplies for the kitchen to maintain inventory levels.
- Sanitized workstation at end of shift to minimize risk of salmonella and other food-borne illnesses.
- Verified completed orders to ensure correct quantity and quality before delivery.
- Monitored temperatures of prepared food and cold-storage areas.
- Handled advanced thawing and food pre-preparation for upcoming meals.
- Distributed food to service staff for prompt delivery to customers.
Education
A&P Technician - Aviation Studys
WestWood College of Aviation
Inglewood, CA11-2004
Skills
- Quality control inspection
- Engine maintenance
- Compliance documentation
- Team collaboration
- Parts ordering
- Safety compliance
- Time management
- Problem solving
- Attention to detail
- Organizational skills
- Training others
- Effective communication
- Maintenance documentation
- Landing gear inspection
- Hardware identification
- Tool control procedures
- Corrosion control
- Ground support operations
- Painting and finishing
- Hydraulic system maintenance
- Inspect repair work
- Blueprint reading
- Preventive maintenance
- Ground support equipment
- Goal setting
- Inspection techniques
- Aircraft maintenance
- Multitasking capacity
- Regulatory compliance
- Logbook documentation
- Excellent communication
- Task prioritization
- Adaptability and flexibility
- Turbine Engines
- Preventive Maintenance
- Safety protocol
- Analytical thinking
- Written communication
- Team building
- Self motivation
Certification
Airframe and PowerPlant License
Timeline
A&P Mechanic
Aerofield Avaition Services
07.2025 - 02.2026
A&P Mechanic/Quality Control Inspector
Ascent Aviation Services
02.2023 - 06.2025
A&P Mechanic/Inspector/Supervisor
NextGen Aviaition Services
09.2021 - 02.2023
A&P Mechanic
Ascent Aviation Services
03.2019 - 09.2021
A&P Mechanic
Bombarbier
02.2019 - 03.2019
Assembler
Honeywell
01.2019 - 02.2019
A&P Mechanic
JetPro Line Maintenance
10.2018 - 01.2019
A&P Mechanic
Kalitta Air, STS AIR
07.2018 - 10.2018
A&P Mechanic
Kingman Airline Services
03.2018 - 07.2018
Machine Operator
Insteel Wire Products
08.2017 - 03.2018
Construction Laborer
Setter Construction
06.2017 - 08.2017
Concrete Laborer
Simon Banuelos Construction
03.2015 - 07.2017
Heavy Steel Welder/General Laborer
MNC Construction
01.2014 - 02.2015
Cook/Kitchen Prep Cook
Dennys Restaurant
02.2010 - 01.2014
A&P Technician - Aviation Studys
WestWood College of Aviation