SRINIVASAN SELVARASU

• Skilled at working independently and collaboratively in a team environment.
• Self-motivated, with a strong sense of personal responsibility.
• Proven ability to learn quickly and adapt to new situations.
• Worked well in a team setting, providing support and guidance.
• Managed time efficiently in order to complete all tasks within deadlines.
• · Responsible for Process control ESD and F&G Loop checks and Update ITRs (B check sheet) day by day in the PIMS BP Completion management system Pre-commissioning dynamic Commissioning of ACE Topside Platforms of instrumentation such as process control loop fire &gas Loops as pre, schedule and standard specification for timely completion of project in accordance with Project HSE & PTW, Generating work permits, toolbox talks, risk assessment and check it on job Co-ordination with Client, vendor.

• Skilled at working independently and collaboratively in a team environment.
• Self-motivated, with a strong sense of personal responsibility.

· Developing work pack and update the SAP Work Orders for maintenance jobs with necessary tasks, estimate hours, the disciplines, materials, special tools, and services to allow efficient scheduling, assignment, and execution of TAR Scope of work, Resources optimization.

· Developing of the Turnaround Work list in the way easier to organize the work, as well as to facilitate review and modifications to the list.

· Sequencing the workflow and aligning the works with other major work scope for SIMOP

· Reviewing Work pack completeness and advising if it required improving the quality of work pack for easy planning execution.

· Working on goal with optimum resource maximum timely safe quality work output and fully committing to the company “Goal Zero” HSE vision

· Communicate and cooperate with Operation/ Maintenance/Material/Logistic/Site visit/Walk down on dedicated areas, Identifying and estimate tools, portable supporting equipment's, and material requirement to complete the works in time and to make sure we operate in budget limit, Planning material and manpower mobilization and demobilization stages

· Planning & Scheduling E&I discipline activities and assisting scheduler to align discipline plan to the overall master plan, Leading risk assessment team for the critical non routine works and identifying controls so the risk stays in ALARP level.

· Develop CMMS experience in work order management, material management, and external services management, Develop work pack for Turnaround in software program of “ROSER SYSTEMS.”

· Working In British Petroleum Khazzan Gas Project Muscat (CPF) Central Processing Facility Gathering Wells Export System Control System Handled Yokogawa CENTUM VP

· ITR activities Cable tray installation under access floor MCT frame installation Laying of internal earthing power, signal and field cables as per schedule Installation of Cabinets and consoles

· Testing& Termination of all cables Preparing materials according to drawing Installation of cable tray supports and tray routing as per given and typical drawing Setup up installation as per given and typical drawing Jb's installation as per given and typical drawing Installation of field instruments as per P&I drawing Involved in preparing for cable cross section.

· Installation and testing of fire and gas detection and protection systems Requirements for installation and testing of electronic instruments in hazardous areas work closely with contractor ‘s Engineering Department to ensure compliance to codes and standards.

· Work closely with the Construction Team to determine the daily priorities for system/subsystem completion ensure continuous and accurate updating of ICAPS as the instrumentation works progress lead the preparation, planning and execution of pre-commissioning and commissioning activities!

· Various sub systems and systems Pre-commissioning and Dynamic commissioning activities including Fire and Gas, PCS, PSD, and Safety Instrumented System

· Reviewing Commissioning Test Procedures (CTP's) System walk downs, vendor co-ordination and witness vendor packages testing as a client.

· Experienced in completions software Share cat and Go completions Ability to lead a team of Supervisors and Technicians

· Pre-commissioning and commissioning activities of wellhead, Export gas pipelines and metering skid instruments RTU Panels metering skid, Deareation chemical Injection skid it includes loop checks and start up activities of all the above skids.

· Conducting Inspection with Client and Consultant Progress monitoring (daily, weekly, and monthly) Certify/witness of testing and commissioning.

· Pre-Commissioning Dynamic Commissioning Start-up and Maintenance of Various System sup system of Wellheads Process Trains, Oil and Gas Separator, Gas Export Compressor flash & Off gas Compressors, high pressure Gas injection Compressor GE turbine Drive, GTG, Pig launcher including all utility systems.

· Monitoring daily progress report Supervise a team of Expat and National Sr Technicians for Pre-Commissioning and Commissioning Well exposure in Foxboro/ Triconex safety system screen for ESD / F&G dynamic test Cause & Effect Gas Turbine, Process Instrumentation and controls, Fire & Gas, Deluge and HVAC Systems

· Close coordination with various disciplines for target date of completion of different inspection and comments from COMPANY to avoid delay of final dossier issuance.

· Preparation of Status report for Construction Commissioning Monitoring of System Data accuracy in the Project completion System and assure that the check sheet is in correct Tag and system hand over systems to Operations (Client)

· Reports to Completion Manager Software Used: WINPCS - (Windows Project Completion System certification tool (PCS)) that is Web-enabled with project graphs – status reports - engineering info and details.

· Review/verification of Test-Packages compliance against the Project specifications, the Quality Plans the Procedures, and Inspection &Test Plans

· Reviewed at sample level the documentation provided to ensure that the Inspection and Test Plan Intervention points have been implemented by the main manufacturers QA/QC team and that Change Control,

· Pre-commissioning and Commissioning Supervise instrument loop checking and conducted cause and effect testing for 3 Off-shore Platforms.

· Responsibilities included pre-inspections on installation completions, punch listing of defects or discrepancies from specifications, practicing Platform HSE regulations and directing workforce compliance, approving/signing off installation punch list completions, coordinated permits for all tasks, and maintaining a healthy and productive worker attitude.

· Taken key role in leading the sub-contractors in preparation of loop folders according to companies Standards and Specifications, loop checking, pre-commissioning and Dynamic commissioning of subsystems and systems of clearing engineering issues like Instrument loop drawings, Data sheets, P&ID'S, In tools, alarm Trip schedule discrepancies.

Involved in SAT, confirming the Modbus serial link communication tests with DCS &SUB-Systems Like (ABB, Triconex, Siemens etc...) Worked with Foundation Field Bus Instruments, involved in clearing punch lists, ensured proper installation of Instruments in accordance with project specifications including ATEX, FM, API and NFPA compliance

· Leading a team consists for maintenance of process control filed instrument Involved in Corrective, Preventive, Breakdown & Shutdown, and annual maintenance of instruments In, Gathering center& Booster Station Crude Oil desalting plant, Condensate Recovery Units, Oil&Gas Separators Scrubber, Inst

· Involving in wellhead upstream project and offshore hook-up activates, coordination with ESU team pre-commissioning, commissioning, loop checking, function checking, punch list preparation and start up activities of all types of field instrumentation and control instrumentation like Triconex PLC, Trident PLC Emerson Delta-v DCS system, Modification, implementation, testing and commissioning on Power Management System using PLC particular in the confirmation of those I/O signals.

· Responsible for writing commissioning procedures, and FAT visits with package TA’s.

Assisting with design and scheduling of mechanical completion to enable the planned commissioning to be completed in the yard and minimize the carryover work to offshore

· Responsible to working under Lead Engineer for Pre-commissioning Commissioning and Integration of PCWU and DUQ Platforms (onshore /offshore) instrumentation such as fire &gas Loops as pre, schedule and standard specification for timely completion of project in accordance with Project HSE & PTW

Generating work permits, toolbox talks, risk assessment and check it on job Co-ordination with Client, vendor,Involved in Analyzers, cause and effects, PSD, ESD, deluge systems, and function tests, of Process activities and Commissioning Pre-Commissioning of Well head control Systems.

· Corrective Preventive, Breakdown & Shutdown, and annual maintenance of instruments In, Gathering Centre& Booster Station Crude Oil desalting plant Condensate Recovery Units, Oil & Gas Separators & Scrubber, Inst

Air Compressor, Liquid Dehydration Units, Heaters, Gas turbine and Fire & Gas systems and Interlock Modifications Installation, pre-commissioning and commissioning of new Oil & Gas Flow Computer Units, Wellhead Instruments / Control Panels, Water Treatment Plants, Air Compressor Unit