Mushfig Abdullayev
Baku,Azerbaijan
Summary
Electrical Engineer with Bachelor and Master degree in Power Engineering from Azerbaijan State Oil Academy and 11 years of Electrical Engineering experience. Skilled in troubleshooting, maintenance, pre-commissioning and commissioning of switchboards, MCC's, lighting systems, PLC's, relay protection, cathodic protection systems, UPS, AC/DC circuits. Ability to interpret single line diagrams and interconnection drawings. I Have worked as an Isolation and Performing Authority during the commissioning of BP SHAH DENIZ 2 project, additionally I have offshore experience in BP Oil & Gas platforms and experience in BTC,SCP, WREP pipelines. Currently working as an Electrical Commissioning supervisor in BP ACE Project.
Overview
11
11
years of professional experience
Work History
Electrical Supervisor
Socar-Petrofac
Baku , Azerbaijan
10.2021 - Current
- Baku
- Demonstrate personal HSSE leadership and excellent HSE behaviours at all times, and ensure that safety expectations are communicated and maintained
- Ensure all team members are fully aware and understand all the projects safe working practices and adhere to them to maintain a SAFE working environment
- Testing of LV & HV distribution boards and ciruits
- Testing of motor control centres, motors, stop start circuits and associated overload
- Testing of trace heating systems and Direct Electrical Heaters
- Testing of Cathodic protection circuits and equipment
- Ex Inspection to IEC regulations
- Performing motor no load runs
- Assist discipline engineers to compile Livening Up Notices to allow sub system/system Energization
- Take part in Tri Party Sub System/System Mechanical Completion walk downs and punch list item categorization
- System Handover Management Process pre commissioning checksheet completion
- Act as Authorised Electrical Person (AEP) for voltage levels less than 1000V AC following assessment by the Responsible Electrical Person and approval by the Site Controller
- Undertake Performing Authority duties in accordance with PTW procedures
- As Building' Electrical documents in accordance with project procedures
- Ensure the projects commitment to Safety is maintained
- To complete the work scope assigned within the defined project schedule, ensuring the engineering design standards are achieved and equipment operability satisfactorily demonstrated.
E&I Field Service Engineer
Global Energy Solution
Baku , Azerbaijan
03.2020 - 09.2021
- Performs field inspections and oversees field measurements and data collection
- Performs package instrumentation and control systems and electrical systems inspection, planned and corrective maintenance
- Performs instrumentation and control systems equipment calibration
- Provide front line support to installation and commissioning activities
- Conducts condition monitoring of equipment
- Supports control system retrofit and upgrade scopes
- Supports and emphasizes the importance of safety and environmental programs and ensures compliance with HSE standards
- Initiates/participates in continuous improvement initiatives in assigned area of responsibility
- Communicates with customer regarding condition of equipment and repair work scope
- Generates and submits field service reports
- Ensures applicable Service Bulletins are reviewed and actions implemented if required
- Recognizes problems and is proactive in helping to resolve them
- Performs equipment troubleshooting and problem rectification
- Evaluates component condition and repair options and performs risk assessment for maintenance activities
- Identifies and implements new or existing repair technology in area of responsibility
- Inspects completed work or work in progress to assure job quality, including off-site work performed by vendors at their facilities
- Contributes to Computerized Maintenance Management System Program (CMMS)
- Performs field repair of driven equipment, pumps, compressors and generators
- Identification & diagnosis of control system, power output maximization and all subsequent failures for analysis - Ensure compliance with all company and governmental safety, environmental and health rules and regulations - Any and all other duties as assigned by the Site Supervisor, including the possibility of occasional workshop-based activities.
Electrical Engineer
CBM Engineering
Baku , Azerbaijan
06.2018 - 09.2019
- As part of the Engineering Department of the Condition Monitoring Team, the Field Service Engineer will have responsibility for the management, support and provision of condition monitoring of existing systems and for supporting the development of reporting based on the surveys
- The post holder will work with the nominated assets to ensure that practices are in accordance with agreed standards
- The main task of the Field Service Engineer is to support safe, economic and timely operations and maintenance of customers' electrical & instrumentation equipment
- The following list outlines the key activities that fit within the role of the Field Condition Monitoring Engineer:
- Responsible for the delivery of the day-to-day delivery of electrical and instrument condition monitoring Program, which consists:
- Partial discharge testing and monitoring of high voltage switchgear
- Partial discharge monitoring of rotating equipment (to identify problems in Motor stator)
- Infra-red Thermography surveys of electrical and Mechanical equipment
- Motor Current Signature Analysis to identify rotor problems
- Trip & close signature analysis of Circuit Breakers (performance analysis)
- Data gathering and front line analysis
- Input to the maintenance strategy for Company
- Assist in the compilation of the maintenance budget with specific discipline focus
- Develop the condition monitoring plan and measure performance against plan
- Produce clear and concise reports with recommendations
- Works with Industry Experts in interpreting data
- Responsible for ensuring that client & company HSE standards are uniformly applied to all activities within your control
- In the event of an emergency, carry out such duties as identified in the emergency response procedure or as directed by site management
Commissioning Electrical Engineer
Azfen J.V
04.2016 - 03.2018
- Include, but are not limited to the following:
- To conduct commissioning inspections and tests, based on documented procedures;
- To conduct Electrical hazard and reliability analysis, system troubleshooting and root cause failure analysis;
- To identify system conditions that are abnormal, determining their cause and recommending corrective actions;
- To perform commissioning works in accordance with standards regarding Testing and Commissioning requirements for cabling, earthing/grounding, generators, HV/MV/LV Electrical Distribution systems and panels, transformers, UPS systems, Automatic Transfer Switches (ATS), lighting and lighting controls, batteries and charging systems, overcurrent protection devices, metering and relaying, power monitoring systems, energy management systems and other related electrical systems, controls and devices;
- Producing of commissioning progress status reporting as required by the project;
- To assists in research and procurement of Commissioning tools/ spares/consumables;
- To assist in preparation of commissioning specifications, basis of design documents during design and submittal reviews;
- Producing of commissioning work packs in line with project procedures;
- Identification of PTW requirements and the raising of applicable permits to cover commissioning work scope;
- Verification and acceptance of mechanical completion and commissioning handover packages in line with the agreed system handover schedule;
- Undertake responsibility to comply with all the Occupation Health, Safety and Sanitation requirements applied within the company.
Electrical Technician
Fircroft Engineering Services.
Baku , Azerbaijan
05.2012 - 04.2016
- Carry out routine CP test post and transformer-rectifier monitoring Measure and record the observed pipe/structure to soil voltage potentials
- Record and report faults, damage or other undesirable condition of the assets
- Liaise with the Senior Engineer in matters relating to the technical and logistical execution of the CP Services
- Participate in DCVG and CIPS and other field survey activities
- Carry out and assist with maintenance, modification and installation activities associated with the CP Services
- Participate in HSE activities and help promote a safety culture throughout the organization
- Ensuring that field vehicles, equipment and tools are maintained in a safe and operable condition at all times
- To monitor the performance of the drivers.
Education
Master of Power Engineering -
Azerbaijan State Oil Academy
2014
Bachelor of Power Engineering - undefined
Azerbaijan State Oil Academy
2010
Skills
- MS office, Windows, Outlook Express, PowerPoint
- Preventative maintenance
- Electrical testing
- Project support
- Reporting and documentation
- Electrical fault diagnosis
- Team leadership and supervision
Languages
English
Intermediate
Russian
Fluent
Timeline
Electrical Supervisor
Socar-Petrofac
10.2021 - Current
E&I Field Service Engineer
Global Energy Solution
03.2020 - 09.2021
Electrical Engineer
CBM Engineering
06.2018 - 09.2019
Commissioning Electrical Engineer
Azfen J.V
04.2016 - 03.2018
Electrical Technician
Fircroft Engineering Services.
05.2012 - 04.2016
Master of Power Engineering -
Azerbaijan State Oil Academy
Bachelor of Power Engineering - undefined
Azerbaijan State Oil Academy
Similar Profiles
Rufat MamedovRufat Mamedov
Commissioning Area Authority at SOCAR PetrofacCommissioning Area Authority at SOCAR Petrofac
Dhimant VoraDhimant Vora
Project Engineer at SOCAR-Petrofac CaspianProject Engineer at SOCAR-Petrofac Caspian
Arzu Zeynalli-AslanovaArzu Zeynalli-Aslanova
Turnover Specialist at Intertek Azeri (SOCAR Downstream Management) (SOCAR-HAOR (Reconstruction and Modernization Project)Turnover Specialist at Intertek Azeri (SOCAR Downstream Management) (SOCAR-HAOR (Reconstruction and Modernization Project)